How to hack WIFI password using cmd windows 10
In this article, we will show you how to hack WIFI password using cmd windows 10. To do this, we will be using the command prompt to change our MAC address so that we can fool the router into thinking that we are a device that is authorized to connect to the network. Before we get started, make sure you have an active internet connection and that your computer is connected to the network you want to hack. Once you have met these requirements, follow the steps below: 1. Open up Command Prompt by pressing Windows Key + R and typing in CMD. 2. Type in the following command and press Enter: ipconfig /all 3. Look for the Physical Address section and make sure it is the same as your computer's MAC address. If not, you can change it by typing in command prompt (admin) this will result in a prompt asking to confirm you want to make changes to PC Settings. 4. Next, select Network Adapter Properties and click on Wireless Properties, then double-click on IEEE802.11 settings 5. Double-click on